Best Hd 1688 Clock Movement in 2022 [*Top Picks*]

Looking for the best hd 1688 clock movement on the market? Weā€™ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.

6259 Reviews Scanned

  • Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement
    Bestseller #1
    Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement (1863)
      Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock. Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel. DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames. Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions. Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
  • Youngtown 12888 Pendulum Type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length.
    Bestseller #1
    Youngtown 12888 Pendulum Type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length. (1863)
      Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions. .Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements. Pendulum type STEP movement, suitable for 9 - 13 mm (9/25 - 1/2 inches) thickness clock panel;Total shaft length: 23 mm ( 9/10 inches), thread length: 15.4 mm ( 3/5 inch).Max Pendulum Swing: 26Ā°;Max Pendulum Weight: 40g ; Max Pendulum Length: 35cm. This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.
  • Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands
    Bestseller #1
    Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (1863)
      Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm). Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel. Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length. DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames. Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
  • LoveinDIY HR1688 Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 2 Long Hands
    Bestseller #1
    LoveinDIY HR1688 Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 2 Long Hands (345)
      Clock replacement set: includes a movement, 2pcs clock hands(Hour and minute hands), a second head, an Iron hook, a hexagon nut, a spring washer, a rubber mat. Match power: this clock movement replacement just need 1.5V AA battery( battery is not included in this package) Material: aluminium material Hour and minute hands, copper second head. Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself. Model: HR1688 Movement, HR07027 black clock hands
  • High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 1/2 in Max Dial Thickness, 9/10 in Total Length
    Bestseller #1
    High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 1/2 in Max Dial Thickness, 9/10 in Total Length (318)
      āœ”ļø High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well. āœ”ļøAccurate time-keepingmotor:Size- total shaft length is 23 mm (9/ 10 inches), thread length is 15.4mm (3/ 5 inches); suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches)thickness clock panel; Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; powered by a AA battery. āœ”ļøSize from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long; The minute hand is about 230 mm/ 9.1 inches in length. āœ”ļø Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements. āœ”ļø Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying.
  • Mudder High Torque Clock Replacement Movement, 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length (Shaft Length 9/10 Inch/ 23 mm, Black)
    Bestseller #1
    Mudder High Torque Clock Replacement Movement, 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length (Shaft Length 9/10 Inch/ 23 mm, Black) (1647)
      High torque clock with hook, I shaft, drive long clock hands (10 mm to 450 mm) TotalĀ shaftĀ length:Ā 23Ā mmĀ (9/Ā 10Ā inches),Ā threadĀ length:Ā 15.4Ā mmĀ (3/Ā 5Ā inches),Ā suitableĀ forĀ 9Ā -Ā 13Ā mmĀ (9/Ā 25Ā -Ā 1/Ā 2Ā inches)Ā thicknessĀ clockĀ panel HandsĀ length:Ā totalĀ hourĀ handĀ length:Ā approx.Ā 75Ā mmĀ (3.0Ā inches);Ā TotalĀ minuteĀ handĀ length:Ā approx.Ā 104Ā mmĀ (4.1Ā inches);Ā TotalĀ secondĀ handĀ length: approx.Ā 136Ā mmĀ (5.3Ā inches) Clock replacement set: includes a movement with hook, 3 black clock hands, mounting hardware Range of use: suitable for repairing, replacing or making a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
  • Youngtown 12888 Snap in Type 4.5mm Hour Shaft Length Continuous Sweep Quartz Clock Movement 8mm Total Shaft Length (A Hands).
    Bestseller #1
    Youngtown 12888 Snap in Type 4.5mm Hour Shaft Length Continuous Sweep Quartz Clock Movement 8mm Total Shaft Length (A Hands). (1863)
      Wall clock movement replacement: Snap In Type Clock Accessory with No Bushing. Young town manufactures the 12888 series in various models,makesure the existing shaft and threads before ordering and you will get the right replacement. Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements. Movement total shaft length is 8mm (5/16 inch),thread length is 4.5mm (11/64 inch). Sweep Silent Movementļ¼šsuitable for 1-2 mm ( 1/25 -5/65 inch ) thickness clock panel.
  • High Torque Quartz Clock Movement Clock Replacement Mechanism with 12 Inch Long Spade Hands for DIY Clock (Black, Shaft Length 1/10 inches/ 23 mm Shaft Length)
    Bestseller #1
    High Torque Quartz Clock Movement Clock Replacement Mechanism with 12 Inch Long Spade Hands for DIY Clock (Black, Shaft Length 1/10 inches/ 23 mm Shaft Length) (2900)
      Clock movement details: high torque clock movement replacement with hook, long shaft, drive long clock hands (10 mm to 450 mm) Total shaft length: 23 mm (1/ 10 inches), with thread length 11.7 mm (9/ 20 inches), jump second movement suits for 4-8 mm (4/ 25-3/ 10 inches) thickness clock panel Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length Package contents: 1 clock movement with hook, 2 hands and some mounting hardware, coming with specially designed cardboard box and instructions Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure, otherwise they will be bent
  • ifundom Clock Mechanism Replacement, Quartz Clock Movement Mechanism Replacement Battery Operated DIY Repair Parts Replacement (A)
    Bestseller #1
    ifundom Clock Mechanism Replacement, Quartz Clock Movement Mechanism Replacement Battery Operated DIY Repair Parts Replacement (A) (103)
      ā°Good for repairing, replacing or making a clock.Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc. ā°Material: ABS. Size: About 5.6 x 5.6 x 1.6cm/2.2 x 2.2 x 0.6inch. ā°For DIY quartz wall clock replacement movement part, applicable frameless 3D Wall clock. ā°Made of ABS material, it is durable and long lasting use. Powered by 1 AA battery(not included). ā°Note: this clock doesn't contain hook, they can't hang directly.
  • Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Fit Dials up to 40 cmļ¼ˆ15.7 Inches ļ¼‰ in Diameter.
    Bestseller #1
    Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Fit Dials up to 40 cmļ¼ˆ15.7 Inches ļ¼‰ in Diameter. (1863)
      Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch). Silent Movement total shaft length is 16 mm ( 41/64 inch ),thread length is 8 mm ( 5/16 inch ),suitable for 2 - 6 mm ( 5/64 - 15/64 inch ) thickness clock panel. Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the shaft dimensions. Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.material to make a clock by yourself. Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself.
  • Also read 1 inch guard Also read Nautical anchor lamp Also read 30 inch wide wood shelf Also read Thermometer hygrometer

Leave a Reply

Your email address will not be published. Required fields are marked *